BSGFG - 3M EC776 FUEL RESISTANT COATING

  • MSDS: BSGFG
  • Manufacturer: 3M COMPANY
  • Product Name: 3M EC776 FUEL RESISTANT COATING
  • National Stock Number: 8040-00-597-9723
Product Identification

Product ID:3M EC776 FUEL RESISTANT COATING
MSDS Date:10/26/1990
FSC:8040
NIIN:00-597-9723
MSDS Number: BSGFG

Responsible Party
3M COMPANY
3M CENTER
ST. PAUL, MN 55144
US

Emergency Phone: 612-733-1110

Info Phone: 714-864-2310

Preparer: C A EISENHARD

Cage: 76381

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 60-70%

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PHENOL-FORMALDEHYDE POLYMER

CAS: 9003-35-4

Fraction By Weight: 10-20%


ACRYLONITRILE-BUTADIENE POLYMER

CAS: 9003-18-3

Fraction By Weight: 10-20%


ETHYL ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 1.0-10%

ACGIH TLV: 1000 PPM


METHYL ALCOHOL (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 0.1-10%

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ACETATE

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 0.0-1%

ACGIH TLV: 400 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


647 GRAMS/LITER. MAXIMUM VOC MINUS WATER MINUS

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE:SEVERE IRRIT
(EDEMA,REDNESS,TEARING,BURNING SENSATION,BLURRED VISION).
SKIN:IRRIT,RED,ROUGH,DRY SKIN(PROLONG/REPEAT). INHAL:RESP SYS
IRRIT,LIGHT-HEADEDNESS. LIVER & KIDNEY DAMAGE (HEADACHE,DIZZY,W
EAK,FATIGUE,UNCONSCIOUS). INGEST:DIGESTSYS IRRIT,LIGHT-HEADED
(NAUSEA,VOMITING). ASPIRATION MAY CAUSE FATAL LUNG DAMAGE

First Aid

First Aid:EYE: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST
10 MINUTES AND CALL A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER.
INHALATION: REMOVE PERSON TO FRESH AIR. CALL A PHYSICIAN. IN
SWALLOWED: D O NOT INDUCE VOMITING. IMMEDIATELY CALLA PHYSICIAN OR
POISON CONTROL CENTER.

Fire Fighting

Flash Point:50.0F,10.0C
Lower Limits:1.40
Upper Limits:19.00
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:FLAMMABLE. OVERHEATED, CLOSED CONTAINERS
ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

Accidental Release

Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. VENTILATE THE
AREA. OBSERVE PRECAUTIONS FROM OTHER SECTIONS. CONTAIN SPILL. COVER
WITH ABSORBENT. PLACE IN DOT APPROVED METAL CONTAINER AND SEAL.

Handling

Handling and Storage Precautions:FOR INDUSTRIAL OR PROFESSIONAL USE
ONLY. KEEP AWAY FROM HEAT & IGNITION SOURCES. VAPOR/SPRAY CAN BE
IGNITED EASILY. AVOID PROLONGED VAPOR BREATHING.
Other Precautions:USE ONLY WITH SUFFICIENT VENTILATION TO KEEP BELOW
TLV/PEL. KEEP CONTAINER CLOSED WHEN NOT IN USE. AVOID CONTACT WITH
EYES & SKIN. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEM SAFETY GOGGLES OR FULL FACE SHIELD
Other Protective Equipment:WEAR SKIN PROTECTIVE EQUIPMENT WHEN HANDLING
THIS MATERIAL.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:164F,73C
Vapor Pres:42.1000
Vapor Density:3.00
Spec Gravity:0.880 (WATER=1)
Evaporation Rate & Reference:5.00 (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT AMBER, THIN LIQUID, CHARACTERISTIC
KETONE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N, FORMALDEHYDE AND SMOKE
PARTICLES WHEN SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Disposal

Waste Disposal Methods:INCINERATE ABSORBED AND BULK PRODUCT AFTER
MIXING WITH FLAMMABLE MATERIAL IN A LICENSED HAZARDOUS WASTE
FACILITY. DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS. EPA HAZARDOUS WASTE NO: D001 (IGNITABLE).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.